+86 21 6079 0303
+86 135 2487 5604

1.3.1 Current-Voltage Characteristic

Measurement of relation between tunneling current and probe-sample voltage is carried out in spectroscopy mode. The spectroscopy is based on the dependence of tunneling current on number of electron states , forming a tunneling contact of conductors, in the energy range from the Fermi level to (Fig. 1), which at gives (see (7) in chapter 1.2.1)

(1)

Thus the tunneling current dependence at constant tip-sample separation represents an allocation of torn bonds as well as other electron states corresponding different energies, i.e. energy band structure of either tip or surface. Function , which was introduced in (6) of chapter 1.2.1, depends on electron state density of phase space plane which is normal to tunneling direction at given .

Fig. 1. Model of MIM system with an arbitrary shape potential barrier.
Positive potential is applied to the right metal.

Using expression (1) and curve at constant tip-sample separation , it is possible to compute the density of electronic states:

(2)

Thus, inspection of and its derivative curves allows to investigate energy levels distribution with atomic resolution. It is possible to determine a conductivity type, in particular for semiconductors – to detect the valence band, conductivity band and impurity band [1-3].

According to (2) and (3) from chapter 1.2.2 tunneling conductivity does not depend on applied voltage in case

(3)

at relation between and is parabolic

(4)

On Fig. 2, 3 experimental dependences , , which were measured for Pt and HOPG samples and Pt-Ro probe using STM Solver P47, is shown. Experimental data are in good agreement with the theoretical predictions (1)–(4).

Fig. 1a.  Experimental (points) and theoretical (solid line)
dependences for Pt

Fig. 1b.  Experimental dependence
for Pt

Fig. 2a.  Experimental (points) and theoretical (solid line)
dependences for HOPG

Fig. 2b.  Experimental dependence
for HOPG


Summary.

  • Tunneling current-voltage characteristic represents number of electron states and their distribution in energy spectrum of electrodes which creates tunneling contact.
  • Differential conduction is proportional an electron state density. For metals at low voltages does not depend on applied voltage (3). At intermediate voltages the relation between and applied voltage is parabolic (4).
  • Experimantal current-voltage and differential characteristic are in good agreement with theory.

References.

  1. G. Binnig., H. Rohrer. Scanning tunneling microscopy. Helv. Phys. Acta. - 1982, - V. 55 726.
  2. A. Burshtein, S. Lundquist. Tunneling phenomena in solid bodies. Mir, 1973 (in Russian).
  3. E. Wolf. Electron tunneling spectroscopy principles. Kiev: "Naukova Dumka", 1990, 454 p. (in Russian).